Critical Reports on Loconav Platform?

Critical Reports on Loconav Platform?

  1. Distance Based Reports 

  1. Daily Distance Traveled Report 

    1. UseCase 1: Daily Billable to the vendor based on distance traveled 

    2. UseCase 2 : Identify vehicles daily performance trends 




  1. Distance Traveled Based on Time Period Report 

    1. UseCase 1: Distance traveled during On duty hours 

    2. UseCase 2: Distance Traveled during Odd hours ( Doesn’t include cross date distances )




  1. Time Interval Based Distance Traveled Report 

    1. UseCase 1: Track Hourly Performances or Interval based Performance 

    2. UseCase 2: Monitor High Performing Hours 



  1. Odometer Based Distance Traveled Report 

Note : Odometer based distance travel report is computed based on Odometer reading added on the vehicle directory. Based on the distance that the vehicle has traveled, Our system automatically tracks probable odometer reading 



  1. Distance Traveled in Different Speed Range 

    1. UseCase 1: Identify drivers driving rashly over long distances 

    2. UseCase 2 : Identify routes where vehicles can travel with good speed




  1. Movement Based Reports 

    1. Vehicle Movement Report 

      1. Use Case 1: Track all individual movements between stoppages i.e where motion status has changed to stopped from moving

      2. Use Case 2: Identify Average Movement Duration between stoppages i.e How much distance a driver would generally travel before taking a break 


Note : Stoppage Duration at the end column is the duration of the stoppage instance before this movement was done. Eg in Row 2 stoppage duration is 5 min signifies that, vehicle had stopped for 5 min before specific movement was captured 





  1. Vehicle Movement Summary Report 

    1. UseCase 1 : Vehicle Utilization for the time period selected by you i.e for the selected time period what is the total movement duration, total stoppage duration,Total Distance Traveled, Fuel Consumed ( if fuel rods are installed) 

    2. UseCase 2 : Track fleet performance over defined period eg Week level, Month Level etc 



  1. Vehicle Summary Report 

    1. UseCase1 : Overlap Vehicle Metrics 

    2. UseCase 2 : Identify Vehicles where  


Note : This report provides summarized information of major vehicle parameters. If the fuel rod is not present then the last 3 columns will not be present.

  1. Stoppage Based Reports 


  1. Stoppage Instance Report 

    1. Use Case 1 : Identify key locations where vehicles are stopping throughout the day. Identify Parking Stops, Identify Client Location 

    2. Use Case 2 : Identify Stoppage Hotspots, Universal Geofences - like Fuel, Toll Stations etc

    3. Use Case 3 : Identify Stoppages with duration greater than thresholds 


Note : This report will be in sync with the vehicle timeline in the history section. All the stoppages done by the vehicle will be available here. When downloading this report in CSV and XLSX format then duration will also be available in a separate column without unit.


  1. Geofence Based Report 


  1. Parking Violation Report 

    1. Use Case 1: Time sensitive delivery business like Newspaper 

    2. Use Case 2: Asset security 



  1. Duration Spent Inside / Outside Report 

    1. Use Case 1: Last mile delivery executives

    2. UseCase 2: Cab Service like Blue Smart 


 





  1. Movement between geofence report 

    1. Use Case 1: High value goods transportation between fixed geofences

    2. Use Case 2: Frequent back and forth movement between Two locations

 


Note : This report only considers direct movement between specified source and destination. This report will only provide details of one way movement eg Onward Movement



  1. Sensor based reports 

Note : Sensor based reports are available only in those accounts where specific sensors are added 

  1. Fuel Based Report 

    1. Use Case 1 : Understand fuel consumption at vehicle level 

    2. Use Case 2 : Identify locations where refuel and fuel theft events occur regularly 

    3. Use Case 3 : Identify fuel consumption based mileage 



  1. Temperature Sensor Report 

    1. Use Case 1 : Compliance Management for Delivery 

    2. Use Case 2 : Transportation of perishable commodities (  Meat, Milk etc ) 

  1. Door Sensor Report / Elock Sensor Report

    1. Use Case 1 : Asset Security & Deliveries 

    2. Use Case 2 : Identify Client Locations and Uncommon locations 

  1. AC Report 

    1. Use Case 1: Identify location where AC was turned on/off 

    2. Use Case 2 : Observe duration for On / Off events - Helps reduce battery discharge events 


  1. EV Charging Report

    1. Use Case 1 : Observe / Monitor charging cycles 

    2. Use Case 2 : Common location where charging is done 

    3. Use Case 3 : Keep a log of all charging events 


  1. Miscellaneous Report 

    1. Night Driving Report ( Generic Report to be enabled for the client )

      1. Use Case 1 : Overnight Journey Monitoring 

      2. Use Case 2 : Parking Violation 

      3. Use Case 3 : Single report across multiple dates





  1. CO2 Emission Report 

    1. Use Case 1 : Compliance Management for petrol ( Litre consumed L * 2.31 = X Kg ) 

    2. Use Case 2 : Compliance Management for Diesel ( Litre consumed L * 2.6 = X Kg )


  1. Immobilization Log Report

    1. Use Case 1 : Monitor immobilization request and final status 

    2. Use Case 2 : Identify users who initiated the request




  1. Minute Wise Report - Closest to Raw Data Report ( Max Interval : 7 day interval)

    1. Use Case 1 : Address cross verification for Insurance 

    2. Use Case 2 : After accident cross verification 



    • Related Articles

    • Generating Reports on the Platform

      The ‘Reports’ module on LocoNav offers a diverse selection of over 50 reports. You can effortlessly view and download reports encompassing crucial aspects such as vehicle utilization, fuel consumption, maintenance history, driver performance, and ...
    • Data Lifecycle Management

      Q. Can I generate reports for last year? Currently, reports can only be generated for the last 6 months of data. If you require a report for data older than 6 months, you can raise a request for the same by dropping a line at LocoNav Cares. Our team ...
    • Error on Reports

      Q. Error while generating report? We understand the importance of timely and accurate reports for your business needs. In the rare event that report generation fails at any particular time, we recommend the following steps: 1. Retry after 30 minutes: ...
    • How Report Schedule Works ?

      Report Schedule on FMS Which reports can be scheduled Report Type Create Schedule Max Interval Data Validity Default Report ✅ 31 Days ( Generally ) 6 months / 180 days Generic Report ✅ 31 Days ( Generally ) 6 months / 180 days Custom Report ✅ 31 Days ...
    • What happens to the data packet when device is offline ?

      Out of Order Data What is OOO or Out of Order Data ? Out-of-order packet: This occurs when a packet is seen with a Timestamp lower than the previously received packet on that connection. Out of Order Data packets are sent by the devices where the ...