Alerts

Alerts
Troubleshooting and FAQ
Common Issues and Solutions: While Loconav's Alerts Module is designed to provide seamless monitoring, users may encounter common issues. Here are some issues and recommended solutions: Issue 1: Not Receiving Alerts Solution: Check your notification ...
Best Practices and Tips
Effective Use of the Alerts Module: To make the most of Loconav's Alerts Module, consider the following best practices and tips: 1. Customize Alerts: Tailor alerts to your specific business needs and use cases by configuring condition based alerts. ...
Alert History Monitoring & Reporting
Viewing Alert History: Users can easily access the history of alerts triggered by their vehicles or assets within the Loconav FMS platform. Here's how: Click on the alert listing within the Alerts Module. Use the time period filter to select a custom ...
Alert Triggers and Notifications
Alert Trigger Mechanisms: Alerts within Loconav's Alerts Module can be triggered through various mechanisms: Real-Time Monitoring: Specific alerts, such as geofence entry/exit, SOS, device removal, and more, operate in real-time. They are generated ...
List of Important Alerts with Logic and Different Use-cases
List of Important Alerts Geofence Entry / Exit Alert Logic: Generated when the vehicle enters or exits any of the geofences created for the account. Use Cases: Ensure vehicles adhere to defined geographical boundaries. Monitor and report on ...
How to subscribe alerts on the dashboard ?
Configuring Alerts: To set up and configure alerts in Loconav's Alerts Module, follow these steps: 1. Navigate to the "Alerts" module within the dashboard 2. Identify the alert you want to configure. 3. Click on "Set Alert" to start the configuration ...
Different Category of Alerts
The Alerts Module within Loconav's platform supports various types of alerts, categorized as follows: Auto-Generated Alerts: These alerts are automatically generated by the system but require users to subscribe to start receiving notifications around ...

Recent Articles
User Management
USER MANAGEMENT User Management can be used to create multiple users within the organization with certain access permission rights. Admin Users can use the standard roles available on the platform or can create multiple Roles based on the ...
My vehicle is offline
It is normal for the platform to show a particular vehicle as offline temporarily. The platform will show a vehicle as offline if the device has not sent any data packet to our server in last few minutes. The platform also shows the time when the ...
Straight Lines on the Map
There are several times when you will see straight lines on the map instead of the actual path travelled by your vehicle. The straight line can pass through buildings, and doesn't follow the exact road or path taken by the vehicle. A straight line ...
How is distance calculated on the platform
Calculation Logic The platform calculates the distance using the standard Haversine formula. This formula is extremely accurate and is used widely to calculate the distances between two locations on Earth. The Haversine formula calculates the ...
Limitations of a GPS device
Signal Obstructions Tall buildings can impact GPS signal reception through the "urban canyon" effect, where buildings block the direct line of sight to the satellites. These obstructions can lead to weaker signals and increased multi-path errors, ...

Popular Articles
Immobilise a Vehicle
Q. How to Immobilise and mobilise a vehicle on the website? Watch How to Immobilise a Vehicle on web app Q. How to Immobilise and Mobilise a Vehicle (for APP)Watch How to Immobilise a Vehicle on the Mobile APP
How is the vehicle's timeline movement summary computed?
Vehicle timeline movement summary is not updated in real time (as done in case of vehicle location and motion status). The movement summary is updated at a minute level interval to determine the motion status of the vehicle for a given minute ...
The current device onboarding process is too cumbersome and time consuming. Can we not get devices pre-fitted with the new VT firmware directly from Mitac?
We are working with Mitac on this and it may take till end of October. Till then, we will have to continue with the current process of updating the new VT firmware by connecting the devices with a computer/laptop on the site.
Currently the dashcam stops giving data once the vehicle is turned off and this results in the vehicle going offline. Can this be solved?
Yes. We are working on a feature called Stealth mode which will address the issue of device going offline. This is how it will work; 1. Dashcam will be put into standby mode once the vehicle is turned off. This helps in reducing the power consumption ...
Renewal / Renew Subscription
Q. How do I renew my subscription? Step 1: When a subscription renewal is due or has expired, you will start seeing a ‘Renew Subscription’ banner at the top of the homepage on your LocoNav web app. Step 2: Click ‘Renew Now’. Step 3: Select the ...

Alerts | Knowledge Base

Troubleshooting and FAQ

Best Practices and Tips

Alert History Monitoring & Reporting

Alert Triggers and Notifications

List of Important Alerts with Logic and Different Use-cases

How to subscribe alerts on the dashboard ?

Different Category of Alerts

Recent Articles

User Management

My vehicle is offline

Straight Lines on the Map

How is distance calculated on the platform

Limitations of a GPS device

Popular Articles

Immobilise a Vehicle

How is the vehicle's timeline movement summary computed?

The current device onboarding process is too cumbersome and time consuming. Can we not get devices pre-fitted with the new VT firmware directly from Mitac?

Currently the dashcam stops giving data once the vehicle is turned off and this results in the vehicle going offline. Can this be solved?

Renewal / Renew Subscription